As a release agent / antistick agent: used in plastic injection moulding, fibre glass moulding, footwear industry, ceramicware production, rubber articles and oven shelves, not in excess of 315 degrees.

Instant spray gloss application; PVC upholstery, rubber and plastic trim, wood and metal surfaces.

Lubrication uses; for most plastic and synthetic / natural rubber or plastic bearing textiles fibres ect.

Directions;

Hold can as near upright as possible, approximately 20cm from the surface. Spray lightly over the surface to achieve the required level finish. Repeat this operation as required.

Benefits;

. Prolongs life of all rubber seals

. Gives a high gloss instant spray shine

. Colourless, odourless, non staining, non-tainting

. May be used as a general purpose release agent

. Can be used on PVC upholstery, rubber, plastic trim, wood and metal